7 in 1 Cubic Graphite Mould For 7 Different Ingots

£19.90 inc. VAT

Category:

Description

THIS AUCTION IS ABOUT ONE, HIGH QUALITY CUBE GRAPHITE MOLD/MOULD FOR 7 OF 1-OZ (31 G OF PURE GOLD) DIFFERENT INGOTS: TWO TRADITIONAL BARS (BIG & SMALL), “COIN” , 8-MM ROUND BAR, SQUARE TABLET WITH ROUND CORNERS, 1″ TRIANGLE & A “RING”. THIS GRAPHITE MOLD/MOULD IS FULLY SUITABLE ALSO TO PRODUCE ALL THESE SEVEN INGOTS FROM ANY OTHER TYPE OF METAL. YOU CAN ALSO TO RE-USE THESE MOLD/MOULD USING GRAPHITE PROTECTOR PAINT (SUPPLIED) AND DEPENDING OF YOUR TOOLS, TEMPERATURES, HEATING TIME, TYPE OF METAL AND YOUR EXPERIENCE.

CUSTOM MADE MOLDS/MOULDS AND OTHER 6-IN-1 AND 7-IN-1 (LEAFS, COINS ETC) MOLDS/MOULDS ALSO AVAILABLE ON REQUEST.

PLEASE NOTE: this picture above shows the same graphite mold/mould from different angles.

Technical Specification:

Dimensions of cube: 37 mm (1.1/2″) x 37 mm(1,1/2″) x 37 mm (1,1/2″)
– Precision = “+10%G”.
– Shape of walls (ingot’s) – “L” (square).
– Maximum heating temperature = 1240 C (2264 F).

– Dimensions of round mold/mould: 25.4 mm (1″) D x 3 mm (3/32″) deep.
– Dimensions of round bar mold/mould: 10 mm diameter (3/8″) x 20 mm (13/16″) deep.
– Dimensions of “ring” mold/mould: 18 mm diameter (3/4″) x 8 mm (5/16″) deep. 9 mm (3/8″) bore.
– Dimensions of standard traditional bar mold/mould: 25.4 mm (1″) W x 12.7 mm (1/2″) x 6 mm (1/4″) deep.
– Dimensions of small traditional bar mold/mould: 25.4 mm (1″) W x 6 mm (1/4″) x 6 mm (1/4″) deep.
– Dimensions of square tablet mold/mould: 25.4 mm (1″) W x 25.4 mm (1″) x 4 mm (1/8″) deep.
– Dimensions of triangle mold/mould: 22 mm (7/8″) x 22 mm (7/8″) x 22 mm (7/8″) x 6 mm (1/4″) deep.

DELIVERY SPECIFICATION:

– This 7-IN-1 graphite mold/mould with 7 different 1-OZ ingots.
– Heat-resist muffle stand for this ingot.
– Graphite protector paint (25 ml pot) for helping to release ingot from the mold/mould.
– Brush for this paint.

Additional information

Weight 0.5 kg